You are here: Pre Application  >  Application  Page Help  >  Attachments  >  Application Completion

Instructions

Please complete the application, then click the "Next" button below. For help on any field, move the mouse over the field name.

Instructions
Inspections: Permit holders are responsible to inspect their own moorings. All moorings are subject to Harbormaster inspections at any time.

(2) Moorings/dockage specifications and inspections.
(a) Mooring specifications. The suitability of mooring tackle for a particular installation will be judged on a case-by-case basis with reference to the standard set forth in the most recent edition of Chapman's "Piloting and Seamanship.”
(b) Owner inspections. Each permittee shall inspect or shall cause his/her mooring to be inspected each season. Winter logs or metal kegs shall not be used in the harbor.
(c) Harbormaster inspections. All moorings are subject to Harbormaster inspections at any time. No notice is required for underwater inspections. Notice of at least five working days will be given if a mooring is to be hauled for inspections. Mooring installations found to be defective will be subject to loss of mooring permit if not corrected within the time specified by the Harbormaster. The maximum time allowed shall be 48 hours. All costs incurred shall be the responsibility of the mooring permit holder.
(d) All mooring buoys shall be white with a blue stripe, as designated by the Harbormaster, and marked with the mooring number assigned.

Float Systems.
(a) Float systems shall be stand-alone floats not connected to the shore.
(b) Floats shall be six to eight feet wide and no more than 20 feet long unless otherwise approved by the Harbormaster.
(c) Commercial float systems controlled by marinas and commercial operators shall be approved by the Harbormaster prior to installation and shall not exceed 40 feet
in length.
(d) All new float flotation shall be polyethylene tanks filled with contained flotation material to prevent contamination of the estuary environment.
(e) Floats must be stable and safe for walking.
(f) Floats shall, at all times, be kept free of appurtenances.
(g) TGtackle shall be a minimum of one-half-inch galvanized chain, bottom anchored at two points, fore and aft.
(h) Chain length shall be 15 feet plus the length of the depth of the water at mean high tide
(i) Floats shall be used for dockage only. Storage of fishing gear, materials, or any other objects shall not be allowed.
(j) No more than two boats shall be moored to a single float system without Harbormaster permission.
(k) No deep draft boats shall be allowed to moor at floats without written permission from the Harbormaster.
(l) All float systems shall be approved by the Harbormaster prior to installation.
Provider Name
Town of Salisbury
Provider Mailing Address
181 Beach Road

Salisbury, MA 01952
Provider Phone
978-395-7123
Provider FAX
Provider Email
harbormaster@salisburyma.gov

Application

Reference Number
GTLLWZHX
Application Status
Unknown
Application Phase
Application Type
Dock/Slip/Houseboat Permit
Application Subtype
Application Sticker Number
How Would You Like To Receive Your Permit?

Applicant

Mobile Phone
First Name
Middle Name
Last Name
Contact Information
Mailing Street
Mailing City
Mailing State
Mailing Zip
Alternate Phone Number
Email Address
Emergency Contact
Emergency Contact Name
Emergency Contact Phone Number

Vessel

Reg or Doc #
Vessel Type
Size
Length
  feet     inches
Characteristics
Year Built
Engine
Engine Type
Engine Make
This is the make of the vessel's engine, if any
Engine Year Built
Engine Horsepower
Insurance
Insurer Name
Insurer Phone
Other
Is Your Engine More Than 15HP?
Waterways Fee required by Town of Salisbury for all boats, over 12’ LOA or with motors of 15HP or greater.

Mooring/Slip

Mooring Number
Location
Mooring Field or Marina

Acceptance

Terms and Conditions
(1) Terms and requirements. Waterways, mooring and dinghy permits for slips, floats, moorings or other docking mechanisms shall be issued by the Harbormaster according to the terms and requirements of the applications and available space in accordance with Subsection F.
(2) Fees. Fees for waterways, mooring and dinghy permits issued by the Harbormaster shall be those authorized under § 102-12.
(3) Waterways permit fees shall apply to all vessels, greater than 12 feet OAL or equipped with a 15 or more horsepower motor, moored or berthed in Salisbury waters for a period of two weeks or more during a calendar year.
(4) The waterways permit shall be affixed to the upper right hand corner, on the outside, of the vessel's transom, not covering the vessel HIN number.
(5) Failure to display a current waterway permit is a violation of this bylaw.
(6) Nonpayment of waterways or mooring fees shall be a violation of this bylaw and may result in fines and/or the removal of vessels. All costs incurred shall be the responsibility of the vessel owner.
(7) Dinghies tied to the Town floats shall not exceed 12 feet in overall length, except by special permit issued by the Harbormaster.
Waterways Fee required by Town of Salisbury: All boats, Over 12’ OAL or with motors 15hp or greater, at moorings or marina slips within the town.
Waterways Permit Fee: $5 per foot - up to June 31st. Then a $25 late fee added on July 1st.

I have read and understand the Online Mooring User Terms and Conditions
I have read and accept these terms